Vissani QR027 Specifications download pdf (Page 8)

Pre-Installation (continued)

PLANNING INSTALLATION

NOTE:

Do not remove the plastic covering on the chimney set at this time, as it

protects the chimney set from scratches during installation.

Number of people required: 2 or more

Carefully check the range hood for damage and for missing parts

prior to installation. If there is any damage or if you are missing parts,

do not proceed with the installation. Report damage and missing

parts immediately. Do not dispose of packaging before you are

satised with your new range hood.

1. Choose a location for your range hood. The range hood location

should be away from strong draft areas, such as windows, doors,

and strong heating vents.

2. Measure all distances to ensure the proper position of the range

hood (A) and chimney set (B, C).

- The size of the range hood installation location must have a

width (1) of at least 29.5 in. (750 mm) and a depth (2) of at

least 19.7 in. (500 mm) deep (2) to accommodate the size of

the range hood (A).

- The minimum distance (3) from the cooking surface to

the range hood is 18 in. (458 mm) for electric ranges, and

29.5 in. (750 mm) for gas ranges. If your gas range species

a different distance, use the greater distance of the two. To

get the best performance, this distance should range from

18 in.–29.5 in. (458 mm–750 mm).

3. Toggle bolts are provided to secure the hood to most wall types.

However, a qualied technician must verify suitability of the bolts,

screws and drywall anchors for your wall type.

4. Due to the size and weight of this range hood, the supports must

be rmly attached to the wall. For plaster or sheet rock walls, the

support must be attached to the studs. If this is not possible, a

support structure must be built behind the plaster or sheet rock.

5. Put a thick, protective covering over your counter, cooktop, or

range to protect it from damage and dirt during installation.

Remove any hazardous objects around the area.

WARNING: Always wear safety goggles and gloves

during installation.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Vissani QR027 Specifications Page 8